RE: Eg-aktion
Hallo,
EG-Action, in eM-Workplace OLP, findet Mann ins Teach-pendant.
Dieser Funktion steht nur beim Servo Zangen zur verfugung.
So kann Mann in die erste zeile einer Pfad ins Teach-Pendant das Process zuweissen, ZB. EG-Spot. für Servo Zangen.
Natürlich braucht Mann die Aktuelsten Teach-Pendant und eine dazu gehörige OLP_CUSTOMER_KEY welche Mann kostenloss bekommen kann:
Vielleicht könnt ihr mir HELFEN
BITTE SEHE THEMA:
ROBCAD\OLP_CUTOMER_KEY
Englische beschreibung der Servo zange:
A servo gun is an electrical spot-welding gun controlled by a servomotor and an encoder. A servo gun usually has two arms: the first, the dynamic or active arm, also designated main joint, is controlled by an electric motor; the second, the static or passive arm, also designated balance joint, is actuated either pneumatically, or mechanically with a spring-return device.
Servo guns differ from traditional pneumatic guns in that whereas the pneumatic guns have three poses, open, semiopen and closed, servo guns are continuous and can move their joint to any desired value within its limits. Thus the robot can open and close the servo gun during motion, thereby reducing cycle time.
